The protocol, device discovery, connection management, and device-control procedures used to facilitate interoperability between audio- and video- and control-based end stations that use IEEE 1722–based streams using native IEEE 1722 frames or using IEEE 1722 IP UDP encapsulated frames on IEEE 802–based networks are specified.
- Standard Committee
- C/MSC - Microprocessor Standards Committee
- Status
- Active PAR
- PAR Approval
- 2024-06-06
- Superseding
- 1722-2016
Working Group Details
- Society
- IEEE Computer Society
- Standard Committee
- C/MSC - Microprocessor Standards Committee
- Working Group
-
P1722 - Audio/Video Bridging Layer2 Transport
- IEEE Program Manager
- Malia Zaman
Contact Malia Zaman - Working Group Chair
- David Olsen
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
1722-2016
IEEE Standard for a Transport Protocol for Time-Sensitive Applications in Bridged Local Area Networks
The protocol, device discovery, connection management, and device-control procedures used to facilitate interoperability between audio- and video-based end stations that use IEEE 1722-based streams on IEEE 802-based networks are specified.
1722-2016/Cor 1-2016
IEEE Approved Draft Standard for a Transport Protocol for Time Sensitive Applications in a Bridged Local Area Network- Corrigendum 1
Correct additional fields text in AES3 Stream Format section of Annex I. (NOTE: This corrigendum was not published as a separate document, but was incorporated in IEEE Std 1722-2016)
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
1722-2011
IEEE Standard for Layer 2 Transport Protocol for Time Sensitive Applications in a Bridged Local Area Network
The protocol, data encapsulations, and presentation time procedures used to ensure interoperability between audio- and video-based end stations that use standard networking services provided by all IEEE 802 networks meeting quality-of-service requirements for time-sensitive applications by leveraging concepts of IEC 61883 are specified in this standard.
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards